Forum Contract Additive Manufacturing


Location: CongressCenter, ground floor, Room Carl Zeiss right

09:35 - 10:30

At Siemens Power and Gas we are utilizing the benefits of Additive Manufacturing
to increase our customers satisfaction, enhance our products and optimize our
processes along the entire value chain from R&D to services. Thereby we are using
AM for our entire portfolio, from the compressor through the combustion to the
turbine applications of our entire fleet. Based on these high-end applications and
the connected requirements, we are driving the transfer of established industrial
standards and certificates also to the AM technologies. Hence, we expect open and
transparent AM systems, allowing us to access and influence all available data at
all times online in realtime; just as in other established industries e.g. Pharma, F&B
and semiconductor. These open systems shall be connected into production lines,
with vertically and horizontally totally integrated automation solutions and also
seamlessly integrated into one end-to-end PLM ecosystem. A holistically digitalized
ecosystem, with one integrated CAx Plattform beyond the classical CAD-CAECAM
mindset and with one data format. In AM all three disciplines consistently
affect one another and hence must be considered and represented simultaneously
to enable disruptive, generative, and more efficient topologies. Innovative Topologies
increasing the overall efficiency of our turbines and therefore also enabling us
to contribute to society, by fostering the global reduction of CO2 emission.

Keynote 2
Ulli Klenk | Siemens AG

Advice: You can export your favourite lectures directly into your personal calender. Choose the lecture by ticking the box on the right side and then click the download button on the top of the schedule. Please export only one date at a time. 

08:30 - 09:30
09:30 - 09:35
Welcome Carl-Zeiss Saal
10:30 - 11:00
Session 1
11:00 - 11:30

Additive Manufacturing – Make or Buy?

Lecture 1/1
Oliver Cynamon | Fit AG
11:30 - 12:00

Additive manufacturing and precision technology – from construction to post-processing

Lecture 1/2
Hannes Fuchshofer | Fuchshofer Advanced Manufacturing – FAM GmbH
12:00 - 12:30

Process and cost optimization because of additive manufacturing

Lecture 1/3
Alexandra Svoboda | JELL GmbH & Co. KG
12:30 - 13:00

Impressive Future – Additive Manufacturing in Logistics

Lecture 1/4
Erik Wirsing | DB Schenker
13:00 - 14:30
Lunch break and visit to the trade show
Session 2
14:30 - 15:00

Additive Roadmap: From rapid prototyping to recognized production technology according to Nadcap standard

Lecture 2/1
Uwe Schulmeister | MBFZ toolcraft GmbH
15:00 - 15:30

The Finishing Touch for High-Volume AM Applications – Challenging the Status quo

Lecture 2/2
Pia Harlass | DyeMansion GmbH
15:30 - 16:00

AM Contract Manufacturing – in the gap between AM-interested and professionals in the use of AM

Lecture 2/3
Matthias Bath | PARARE GmbH - Industrieller 3D-Druck
16:00 - 16:30

How MES Transfers Data Efficiently through the AM Value Chain.

Lecture 2/4
Stephan Kühr | 3YOURMIND