Forum AM Science I


Location: CongressCenter, 3rd floor, Room Panoramasaal

Advice: You can export your favourite lectures directly into your personal calender. Choose the lecture by ticking the box on the right side and then click the download button on the top of the schedule. Please export only one date at a time. 

08:30 - 09:30
09:30 - 09:35
Welcome Carl-Zeiss Saal
09:35 - 10:30

At Siemens Power and Gas we are utilizing the benefits of Additive Manufacturing
to increase our customers satisfaction, enhance our products and optimize our
processes along the entire value chain from R&D to services. Thereby we are using
AM for our entire portfolio, from the compressor through the combustion to the
turbine applications of our entire fleet. Based on these high-end applications and
the connected requirements, we are driving the transfer of established industrial
standards and certificates also to the AM technologies. Hence, we expect open and
transparent AM systems, allowing us to access and influence all available data at
all times online in realtime; just as in other established industries e.g. Pharma, F&B
and semiconductor. These open systems shall be connected into production lines,
with vertically and horizontally totally integrated automation solutions and also
seamlessly integrated into one end-to-end PLM ecosystem. A holistically digitalized
ecosystem, with one integrated CAx Plattform beyond the classical CAD-CAECAM
mindset and with one data format. In AM all three disciplines consistently
affect one another and hence must be considered and represented simultaneously
to enable disruptive, generative, and more efficient topologies. Innovative Topologies
increasing the overall efficiency of our turbines and therefore also enabling us
to contribute to society, by fostering the global reduction of CO2 emission.

Keynote 2
Ulli Klenk | Siemens AG
10:30 - 10:45
Session 1
10:45 - 11:15

Mechanical properties of lasersintered PA12 parts under various statical load speeds and durations

Lecture 1/1
Andreas Wörz | Universität Erlangen, Lehrstuhl für Kunststofftechnik
11:15 - 11:45

Verification of room-temperature-crosslinking two-component polysiloxanes, RTV-2 silicones, for material extrusion-based additive manufacturing

Lecture 1/2
Ireneus Henning | Universität Duisburg-Essen
11:45 - 13:30
Lunch break and visit to the trade show
Session 2
13:30 - 14:00

Influence of exposure parameters and strategies on elongation at break using powder bed fusion of metals

Lecture 2/1
Sebastian Platt | Universität Duisburg-Essen, Lehrstuhl Fertigungstechnik
14:00 - 14:30

Schlieren- und Shadowgraphy for Visualization of the Shielding Gas Dynamics in Laser-Powder Bed Fusion (L-PBF)

Lecture 2/2
Birk Hoppe | SLM Solutions Group AG
14:30 - 15:30
Session 3
15:30 - 16:00

Characterisation of Laser Sintered Parts made of Aluminum-Reinforced Polyamide 12 for Usage in a Model Testing of Marine Screw Propellers

Lecture 3/1
Anna Tarasova | Universität Duisburg-Essen
16:00 - 16:30

Examination of the influence of various post-treatment methods on the surface topology of laser sintered polyamide 12 samples

Lecture 3/2
Livia C. Wiedau | Universität Duisburg-Essen, Lehrstuhl Fertigungstechnik