Forum Aviation


Location: CongressCenter, 2nd floor, Room Ch. Reichart

Advice: You can export your favourite lectures directly into your personal calender. Choose the lecture by ticking the box on the right side and then click the download button on the top of the schedule. Please export only one date at a time. 

08:30 - 09:30
09:30 - 09:35
Welcome Carl-Zeiss Saal
09:35 - 10:30

Qualification of components via Laser Beam Melting (LBM) in aerospace is subject
to a series of procedures, quality gates and tests. Specifications, norms and standards
are indispensable and form the basis for the qualification. An overview of the
most important standards and specifications will be given in the talk.
For more than 15 years, the Ariane Group, in collaboration with corporate partners,
has been developing and testing external companies and institutes for additive
manufactured components for applications e.g. in the field of turbopumps, combustion
chambers and structural components such as e.g. actuator bracket.
As part of the Ariane programme, many components manufactured using Laser Beam
Melting (LBM) will be developed in the launcher sector and will be flight-qualified
with the planned maiden flight of the Ariane 6 in 2020 and industrialized in the years
to come.
In addition to laser melting, other processes such as Wire & Arc Additive Manufacturing
(WAAM), Laser Metal Deposition (LMD) and so-called Cold Gas Spraying
(CGS) for large structures in development and qualification. Copper, steel and
materials (e.g. Inconel 718, Inconel 625, Hastelloy X) are the once
materials chosen for the various applications.
The presentation gives an overview of the challenges and hurdles in the introduction
and qualification of materials and processes and the use of additive-fabricated
components for space propulsion.

Keynote 3
Dr. Steffen Beyer | Ariane Group GmbH
10:30 - 10:45
Session 1
10:45 - 11:15

Industrialization of post-processing for additive manufacturing parts

Lecture 1/1
Viviane Kettermann Fernandes | Aalberts Material Technology; Fraunhofer IAPT
11:15 - 11:45

Additive parts from GE Aviation in mass production

Lecture 1/2
Dr.-Ing. Günter Wilfert | GE Aviation Munich
11:45 - 13:30
Lunch break and visit to the trade show
Session 2
13:30 - 14:00

Potentials and Certification of AM in aviation applications at Liebherr-Aerospace GmbH

Lecture 2/1
Philipp Glötter | Liebherr-Aerospace Lindenberg GmbH
14:00 - 14:30

Digital data chain for process data acquisition and analysis during laser beam melting

Lecture 2/2
Mathias Sebastian Palm | ArianeGroup GmbH
14:30 - 15:00

Qualification of a high-alloy case-hardening steel for Additive Manufacturing of bearings and evaluation of its performance

Lecture 2/3
Dr. Daniel Gerhard | Schaeffler Technologies AG & CO. KG
15:00 - 15:30

Wavelength Dependent Laser Processing of Ceramic Materials for Aerospace and Space Applications

Lecture 2/4
Stefan Polenz | Fraunhofer IWS